16 Mil System

The 16 Mil System is Petra’s most basic system. It consists of one primer coat of 100% solids epoxy, and one top coat of 100% solids epoxy. Each coat is applied at approximately 8 mils thick. This thin-film system is applied over mechanically scarified surfaces (using shot-blast machines, or planetary grinders ) and can be applied over properly cleaned and sanded existing coatings. These are pigmented systems, and can have an orange peal finish, or non-skid textures can be achieved using aluminum oxide aggregate.

Add on option: For added gloss retention, UV stabilization, and chemical resistance, an additional top coat of Aliphatic Polyurethane can be applied. (This upgrades the floor to what we call a 20 Mil EPU System)

16 Mil Flooring Graphic
16 Mil System Flooring