20 Mil EPU System

The 20 Mil System is is an affordable thin-film system. It consists of one primer coat of 100% solids epoxy, followed by a build coat of epoxy and a final top coat of aliphatic urethane.  The urethane provides added gloss retention, UV stabilization, and chemical resistance.  This thin-film system is applied over mechanically scarified surfaces (using shot-blast machines, or planetary grinders ) and can be applied over properly cleaned and sanded existing coatings. These are pigmented systems, and can have an slight orange peal finish, or non-skid textures can be achieved using aluminum oxide aggregate.

Our Most Basic, 16 Mil System consists of just two coats of 100% solids epoxy.  This can be an appropriate finish for warehouse spaces and any areas that will not receive direct sunlight.